This easy Instant Pot chuck roast recipe with carrots, potatoes and a luscious, flavorful gravy is the ultimate comfort food. Incredibly tender, melt-in-your-mouth pot roast is possible in far less time with the help of your pressure cooker.
My ultimate goal with this recipe was to create an Instant Pot chuck roast that is fast, easy and flavorful. I’m thrilled with the result and so happy to be sharing it with you today!
When the folks in my house told me it was the best pot roast they’d had, I really knew I was on to something. This is a big statement as there have been a whole lot of pot roasts cooked up in my kitchen.
There are important tips and tricks in this recipe that set it apart from other pressure cooker pot roast recipes. This post includes all the details you need for a perfect result.
Table of contents
Why This Recipe Works
- It calls for common, easy to stock ingredients
- A delicious seasoning blend creates the perfect, old-fashioned pot roast flavor.
- The Instant Pot comes to pressure and releases pressure only one time, saving precious time.
Many of us grew up eating our mom’s or grandma’s pot roast and it is truly a comfort food classic. Most of those old recipes were cooked on the stove, in the oven and sometimes both. With the pressure cooking method, you can reach that same tender result in a fraction of the time.
How Long Do You Cook Chuck Roast in an Instant Pot?
No more having to start a meal like this in the early afternoon. With the help of your Instant Pot you can have perfectly tender pot roast on your table in just over an hour.
To speed the cooking process along even more, you can cut the chuck roast into chunks so that it cooks in one 35 minute cycle with the vegetables. This is about half the time it can take to cook a whole roast.
Ingredient Notes
- Boneless beef chuck roast – See below for detailed information on which cut is best for pot roast.
- Pot roast seasoning mix – An assortment of commonly stocked dried herbs and spices creates amazing flavor.
- Carrots – Look for substantial carrots and cut them into large 2- to 3-inch pieces.
- Potatoes – I like to use a combination of baby gold and red potatoes.
- Olive oil
- Diced yellow onion
- Minced garlic
- Tomato paste
- Red wine – A medium to full-bodied red wine, like Cabernet, Zinfandel, or Merlot, is the best choice.
- Low-sodium beef broth
- Worcestershire sauce
- Cornstarch – For thickening the gravy.
How Do You Add Flavor to Pot Roast?
A delicious mixture of dried herbs and spices adds a TON of flavor to the chuck roast and the gravy. This is the key to flavor and one of the things that sets this recipe apart from others. Many other pot roast recipes are under seasoned resulting in a bland, flavorless roast.
The amounts called for in the recipe will make exactly the amount of seasoning needed. It can be mixed up in advance and stored in an airtight container to save time.
What is the Best Cut of Beef for Pot Roast?
Chuck roast is the most common cut of beef used to make pot roast. Chuck is from the front part of the animal and the different cuts will be labeled as blade, boneless cross rib, top blade, bottom blade, and shoulder. And, there can even be different names for the same cut from store to store. I know how confusing this can be! Certified Angus Beef has detailed information on the specific cuts of beef that are best for braising.
Here are the details on my favorite cuts to use for pot roast.
Boneless Chuck Cross Rib Roast
I love the boneless chuck cross rib roast (the cut pictured above) which is sometimes labeled as a shoulder roast. This is a leaner cut of chuck and it requires less trimming. Using a leaner cut means the drippings will be less greasy and you’ll end up with a clean and luscious gravy for your Instant Pot chuck roast.
Boneless Chuck Pot Roast
A traditional chuck pot roast is a rectangular, highly marbled cut that’s easy to find at most grocery stores. Nothing rivals a chuck pot roast in terms of a tender result, but it has quite a bit of fat and requires more trimming. As an example, we used a chuck pot roast in the video for this recipe so take a look at the recipe card below to see it in action.
Cutting the chuck roast into chunks allows you to cover more surface area of the meat with the seasoning mix which means more flavor. It also gives you the opportunity to more effectively trim the fat which will yield a better gravy.
How to Make Instant Pot Pot Roast
Prep the Roast
- Using a sharp knife, cut the roast into 4 to 6 chunks. How many chunks will depend on the size of your roast. If you are using a highly marbled cut of chuck, cut it at the seams where you see veins of fat running through it. Trim and discard the fat from the edges of each piece. There will be small fat deposits left, but if you start with a 4 pound highly marbled piece of chuck, you could end up trimming as much as ½ pound of fat.
- Sprinkle the seasoning mix over the chunks of beef and use your hands to press it into the surface of the meat. I like to do this on a foil lined board for easy cleanup.
Cook the Chuck Roast and Vegetables
- Use the sauté function on your Instant Pot to sear the seasoned beef chunks in a little olive oil in batches. Set the seared beef aside and sauté the diced onion and garlic. Add the tomato paste, a little red wine, beef broth, and Worcestershire sauce. Flavor baby! Return the seared chunks of beef to the pot and tuck them down into the cooking liquid.
- Next, layer the carrots and potatoes on top of the meat so they’re slightly above the level of the liquid. Secure the lid and cook the pot roast on high pressure for 35 minutes. When done, allow the Instant Pot to do a natural release of pressure for 10 minutes and then manually release any remaining pressure.
Because the beef has been cut down and will cook much faster, you can add the carrots and potatoes at the beginning of the cooking process. This means the pot only needs to come to pressure and release pressure once and saves you about 15 to 20 minutes.
How Much Liquid Should I Use?
In a 6-quart Instant Pot, it takes about 2 ½ cups of liquid to rise just to the top of the chunks of beef. The chuck roast needs to be completely submerged in the liquid to cook properly. To ensure that the carrots and potatoes don’t get mushy, they should rest on top of the chunks of beef.
How to Make the Best Pot Roast Gravy
- After removing the pot roast and vegetables from the Instant Pot, set it to sauté and add ½ cup of water to the concentrated cooking liquid in the bottom of the pot. Taste and if needed, add additional water to dilute as desired.
- In a small bowl, whisk together the water and cornstarch and whisk the slurry into the cooking liquid. Then, simmer the gravy for about 5 minutes, or until it is thickened to your liking.
If the gravy is not as thick as you’d like after simmering, mix together an additional 1 tablespoon water with 1 tablespoon cornstarch and whisk it in to the gravy to thicken it further.
Serving Suggestions
Use two forks to shred or separate the cooked chuck roast into large chunks and place it on a serving platter with the carrots and potatoes. Serve it with the gravy and a warmed loaf of crusty French bread for dipping.
Now, go forth and eat pot roast! If you try this recipe I’d love to hear how it worked out for you in the comments section below.
More Instant Pot Recipes
- Instant Pot Beef Stew
- Chili in the Instant Pot
- Instant Pot Rotisserie Chicken
- Pressure Cooker Baked Potato Soup
- Instant Pot Mexican Casserole
Check out my entire collection of Instant Pot Recipes.
Sign up my free newsletter for all the latest recipes and join me on Facebook, Instagram and Pinterest for tons of cooking inspiration!
Instant Pot Pot Roast
Ingredients
For the Pot Roast
- 3 ½ to 4 pound boneless beef chuck roast
- 3 tablespoons olive oil, divided
- 1 cup diced onion
- 2 teaspoons minced garlic
- 2 tablespoons tomato paste
- ½ cup medium to full-bodied red wine , like Cabernet, Zinfandel, or Merlot
- 2 cups low-sodium beef broth
- 1 tablespoon Worcestershire sauce
- 4 carrots, peeled and cut into large 2- to 3-inch chunks
- 1 ½ pounds whole baby potatoes
For the Pot Roast Seasoning Mix
- 1 ½ teaspoons sea salt
- 1 ½ teaspoons dried crushed rosemary
- 1 ½ teaspoons dried thyme
- 1 teaspoon freshly ground black pepper
- 1 teaspoon granulated garlic or garlic powder
- 1 teaspoon onion powder
- ½ teaspoon paprika
For the Gravy
- ½ cup water, or as needed
- 2 tablespoons cornstarch, or as needed
- 2 tablespoons cold water, for the cornstarch slurry
Instructions
- Cut the chuck roast into 4 to 6 chunks, separating at the seams to expose the fat deposits (if using a highly marbled chuck roast). Use a sharp knife to trim as much of the fat as possible from the chunks of roast. It's fine if some fat remains but trim as much as you can to ensure that your gravy will not be overly greasy. Place the trimmed chunks of roast on a large piece of foil and blot dry with paper towels.
- Combine the seasoning mix ingredients in a small bowl. Sprinkle the rub over the pieces of beef and use your hands to press the seasoning into the meat. Wash those hands!
- Press the SAUTÉ key on the instant pot and the ADJUST key to toggle to the MORE setting. Wait for the pot to say “HOT” before adding ingredients.
- Add 2 tablespoons olive oil to the heated pot. Add half of the seasoned beef (or as much as will fit comfortably without being too crowded) and sauté for 2 to 3 minutes per side, or until nicely seared. Transfer seared beef to a plate and repeat with remaining 1 tablespoon oil and the rest of the beef. Transfer second batch of beef to the plate and set aside.
- Press CANCEL and then select SAUTÉ again and ADJUST to the REGULAR setting. Add the onions and garlic to the pot and sauté for 2 to 3 minutes or until tender. Add the tomato paste and cook, stirring to scrape up any browned bits from the bottom. Add the red wine, broth, and Worcestershire sauce. Nestle the chunks of browned beef down into the sauce and then top with the carrots and potatoes. Don’t stir. You want the meat submerged in liquid and the carrots and potatoes on top.
- Place the lid on the Instant Pot. Press the MANUAL button, select HIGH, and set the time to 35 minutes (making sure the steam release handle is in the “Sealing” position). After the cooking is complete allow the Instant Pot to do a natural release for 10 minutes then use a long handled spoon to push the steam release handle to the “Venting” position to allow any remaining steam to release completely before you open the pot. Press CANCEL.
- Transfer the carrots and potatoes to a serving dish and tent with foil to keep warm. Transfer the beef to a cutting board and let it rest while you make the gravy.
For the Gravy
- Press SAUTÉ and ADJUST to select the LOW setting Stir ½ cup water to the concentrated cooking liquid in the Instant Pot to dilute it a bit. Taste and if needed, add additional water to dilute as desired. In a small bowl whisk together 2 tablespoons cold water and 2 tablespoons cornstarch. Whisk the mixture into the Instant Pot and simmer for about 5 minutes or until the gravy has thickened to your liking, stirring occasionally. Press CANCEL and unplug the Instant Pot. Transfer the gravy to a gravy boat.
For Serving
- Shred or chunk the chuck roast and serve with the potatoes, carrots, and plenty of gravy!
Video
Notes
Nutrition
Nutrition information is automatically calculated using generic ingredients, and is an estimate not a guarantee. For more accurate results, please refer to the labels on your ingredients at home.
Instant Pot Recipes
Turned out great, being a professional butcher I noticed in the pictures you’re using a chuck clod or a crossrib roast which like you said would make your gravy less greasy because there isn’t a lot of fat in it. However I think a traditional chuck pot roast is definitely the way to go with this recipe the fat that is marbled throughout the chuck is so flavorful and will keep the meat from drying out.
Hi Justin. You’ll definitely get a nice, tender result with a traditional chuck but I’ve had success with the leaner cuts as well with this method. But, I agree, it’s a great choice for a dependable result. So glad it worked out for you. 🙂
This recipe looks wonderful. I applaud you for addressing so many points in the preparation that many recipes that I have read omitted. I am new to pressure cooking so all of these tips and nuances that you have included make me feel like I can do this with success while I am in an out this afternoon and evening getting three kids shuffled around town. Thank you for sharing!
Comments like yours make my day, Kristie. Thank you! 🙂
My IP doesn’t have an Adjust or Manual Setting. What settings should I be using for Sauté-ing and then finally cooking everything? Excited to try this one!
Hi Jack. If your IP has a sauté you can use whatever setting is available to you. If not, just follow the recipe as written but do the portion that requires sautéing in a skillet on your stovetop and then transfer it to your IP. A bit more work but it should work out just fine.
I have the sauté setting. It’s the next step that I am not sure about. Should I be using the Pressure Cook button or the Meat button once everything is sautéd and ready to be cooked? For how long?
I have the Instant Pot IP-Duo if that help 🙂
Okay, gotcha! You should use the Pressure Cook button in place of the Manual button. Check out this helpful post that explains the button functions on different models.
hi! would the cooking time be the same for a frozen chuck roast?
Hi Maline. No, it would definitely take longer but without testing I can’t say how long. I think for the best result and for timing it to cook along with the carrots and potatoes the meat should be fully thawed when you start.
Oh my Goodness this was absolutely amazing so delicious. Thank you for sharing this recipe I will make it again and again. This was only the 2nd time using my IP and Love it.
My husband doesn’t like Pot Roast but eats it occasionally since I love it. After a couple bites he said, “Now, this is good!” and my kids liked it too. Thank you!
Yum yum yum!! I didn’t have potatoes and only had a 2.25 lb chuck so there was a lot of liquid, but it made a really tasty stew! The meat needed some more time to fall apart, but since it turned more into a soup, we didn’t mind and it’s was nice and tender. The broth is so good. I’m definitely saving this recipe!
Hi! I made this tonight and my family loved it! It was my first time using my Instant Pot. I did notice that the liquid did not reduce and the meat was a little dry. I followed the recipe completely… although I used rump instead of chuck. Could that have been the problem? Thanks!
Yes, definitely! A rump roast has less fat running through it so it can be tougher even after cooked than a chuck roast. I recommend trying it again with a chuck for a super tender result.
Fabulous recipe. Very impressed. What would you guess the Weight Watchers points would be? I’m new to instapot as well as weight watchers.
So glad you liked it, Tippi! I’m not at all familiar with WW but I believe there are calculators online?
Made this for family and we had no leftovers (sadness for my husband who loves leftovers) but was so glad I tried it and the advice was so on point. I needed them as I have not been successful with pot roast in the IP. Now I think I can be more confident in making a pot roast that will be consistent as your recipe is the best I’ve found. Thank you from my whole family!!!!
This recipe turned out absolutely amazing!!! I never have luck with making a tender pot roast and definitely never make my own gravy. I will be keeping this recipe to make over and over. My husband loved it! Thank you!
Soooo impressed! This turned out perfectly. If I hadn’t made it myself, I would not have believed how juicy this was and completely falling apart in this short of time. Best pot roast I’ve ever had, hands down!
I’m not one to usually leave a rating on recipes. But this was the best pot roast I’ve ever made. I Usually tweak most recipes I resisted the urge to tweak this one because it sounded so good. It was outstanding.
Thank you, Richard. I’m so happy to hear this!